192.168.1.0 – A Guide to Access And Customize Devices Network
192.168.1.0 is an IP address that belongs to a private network. It is typically used as the network address, meaning it cannot be assigned to any device on the network. IP addresses starting with 192.168 are reserved for local area networks (LANs) and are not accessible to the public via the internet. By using this address, users can ensure the security of their LAN while still being able to access the internet.
192.168.1.0 Login
To login to 192.168.1.0, click on IP and paste the password.
Default Username and Password= “admin“
192.168.1.0 IP Login
Follow the steps below for the 192.168.1.0 IP login.
- Open your browser and enter the IP address “192.168.1.0” in the address bar.
- Enter the username and password. Username “admin” and also the password.
- Once you logged in, you will get access to the router’s admin panel.
If your device has not accepted the username and password combination then you should check the default username and password for your router.
Default 192.168.1.0 Password:
Default 192.168.1.0 password with router model, you just find your router name and copy the username and password.
| Router’s name | Username | Password |
| ASUS | admin | admin |
| Airlink101 | admin | admin |
| Aztech | admin | admin |
| Billion | admin | admin |
| CNet | admin | admin |
| CyberTAN | – | admin |
| D-Link | admin | – |
| Dovado | admin | password |
| DrayTek | admin | admin |
| Edimax | admin | 1234 |
192.168.1.0 Reset Steps
To reset 192.168.1.0, you need to reset the device that is using this IP address as its default gateway. Router brands like Cisco, Ubiquiti Networks, TP-Link, Netgear, D-Link, and Tenda use “192.168.1.0” as their default IP address. Here’s what you need to do:
- Locate the reset button on the device. A small button is located on the back or bottom of the device.
- Press and hold the “reset button” for 10-30 seconds or until the device restarts.
- Wait for the device to fully restart and re-establish a connection to the internet.
- Log in to the device’s web interface using the default login credentials “admin” for username and password.
- If you don’t know about your router IP then first see how to find the router IP.
Note: Resetting the device will erase all custom settings, so you may need to reconfigure your network settings after the reset. Make sure to write down any custom settings before resetting the device.
FAQs
192.168.1.0 is a private IP address that is used as the network address for local area networks (LANs).
192.168.1.0 is a private IP address and is not directly accessible from the internet.
No, you cannot access the internet directly using the IP address 192.168.1.0.
No, the IP address 192.168.1.0 is often used as the network address and cannot be assigned to a device on the network.
The subnet mask for 192.168.1.0 is 255.255.255.0, which allows for up to 256 IP addresses in the range of 192.168.1.1 to 192.168.1.254 to be assigned to devices in the network.
