PLDT Router Login: Access Your Router Settings in Minutes
Logging into your PLDT router is a simple process that can help you manage your network, secure your connection, change your Wi-Fi name and password, and troubleshoot any issues that may arise. With PLDT Router Login, you can easily access the web interface with the help of 192.168.1.1 IP to configure and manage PLDT router settings. With this step-by-step guide, you’ll be able to log into your router in no time and take advantage of all its features.
PLDT Router Login
To login to PLDT Router, click on IP and paste the password.
Default Username= admin and Password= 1234
How to Login to the Pldt Router? Pldt Router Login
Follow these steps to login the PLDT router.
- Open your browser.
- Type the 192.168.1.1 IP in the address bar.
- Paste the PLDT router default username and password.
- PLDT default username= admin and default password= 1234
- You can check your username and password from the back of your router/modem sticker.
Note: How do I fix 192.168 1.1, not opening? If you facing any error with the “192.168.1.1” IP then you should try “https://192.168.1.1”. When you try this IP you will see an error message come on your screen. You just need to click on the “Advanced” button and again click on the “safe” button.
The default IP addresses for PLDT Ultera routers are “192.168.15.1 and 192.168.22.1”.
At the first time of admin panel login, you’ll be prompted to modify your account password, SSID name, and authentication password. To do this, you’ll need to enter your Account Management Username and Password, 2.4G SSID1 (optional), and 5G SSID1 (optional). Make sure to keep your new passwords secure and remember them for future logins.
If you do not get the login page with this 192.168.1.1 IP then you should find your IP address first. Because the default router IP addresses are different for every router.
PLDT Router Setup: Change PLDT WiFi Password and SSID
Here are the few steps of PLDT router setup, you just need to follow the below steps for changing your PLDT wifi router password and SSID. Let’s start.
- Open Your Browser.
- Enter “192.168.1.1” IP in the address bar.
- Write Username: admin and Password: 1234 and click Login.
- Go to “ Network >> Wlan Settings >> Advanced”.
- Enter your new “SSID NAME” and “Passphrase”.
- Select Security Mode as “WPAPSKWPA2PSK”.
- Click on Apply.
How to Login to PLDT Superadmin and PLDT Adminpldt?
You may need to login to the PLDT superadmin or PLDT adminpldt portal to manage your account and settings. Here’s how to log in to both portals:
PLDT Superadmin Login:
- To login into PLDT superadmin use the given below username and password.
- Click on “Debug switch”.
- Enable the “Web admin switch” option.
- Click on “Apply”.
- Click on “Logout”.
Model | Username | Password | IP Address |
ONU Fiberhome AN5506-04-FAT (RP2662), AN5506-04-FA (RP2646), & AN5506-04-F (RP2684) modems/routers. | f9!6b1e1rhO3es~u!p@e#r$a%d^m*i(n | s)f_U+h|g{u@5h2o1q0b1l | https://192.168.1.1 |
PLDT ONU Fiberhome AN5506-04-FA (RP2631), and HG6245D (RP2662) firmware version | 2020. | f~i!b@e#r$h%o^m*esuperadmin | s(f)u_h+g|u | https://192.168.1.1 |
ONU PLDT Fibr AN5506-04-FAT, AN5506-04-FA (RP2627), AN5506-04-F (RP2658)software version | 2019. | fiberhomesuperadmin | sfuhgu | https://192.168.1.1 |
ONU Black Fiberhome AN5506-04-F (RP2613) firmware. | admin1234 | admin1234 | https://192.168.1.1/fh |
PLDT Adminpldt Login:
- Enter “192.168.1.1/fh” IP into your browser search bar.
- To login into ADMINPLDT use the given below username and password.
- After it you will successfully login to your adminpldt.
Model | Username | Password | IP Address |
Fiberhome AN5506-04-F ( RP2613/RP2658),AN5506-04-FA (RP2627) & AN5506-04-FAT | adminpldt | 6GFJdY4aAuUKJjdtSn7dC2x | https://192.168.1.1/ |
Fiberhome HG6245D RP2602, AN5506-04-FA (RP2631/ 2646), AN5506-04-FAT (RP2662), AN5506-04-F (RP2684), & HG6245D (RP2740) | adminpldt | z6dUABtl270qRxt7a2uGTiw | https://192.168.1.1/ |
PLDT Fiberhome HG180v2 | adminpldt | 3UJUh2VemEfUtesEchEuSHA | https://192.168.1.1/ |
PLDT Home WiFi R051 | [blank] | pldthome | https://pldthomewifisettings.net |
Huawei HG8245A,HG8245Q, HG8245U, HG8145V & HG8145V5 | adminpldt | 1234567890 | https://192.168.1.1/ |
Huawei HG8245A, HG8245Q, and HG8245U | telecomadmin | admintelecom | https://192.168.1.1/ |
Huawei PLDT Home Fibr HG8145V5, HG8245U, & HG8245Q | adminpldt | AC2DIU7QW3ERTY6UPAS4DFGor 1234567890 or 0123456789 | https://192.168.1.1/admin.html |
ZyXEL AMG1302-T10D | adminpldt | zoxm41upyj/3wj/3g42j4wk | http://192.168.1.1/ |
ZyXEL VMG3926-B10A | adminpldt | apyn52vqzk/4xk/4h53k5xy | http://192.168.1.1/ |
ZyXEL VMG3625 | adminpldt | !@QWaszx#$asdgh56TYghbn | http://192.168.1.1/ |
Baudtec RN243R4-A6 | adminpldt | qVuUKLmCJJhCF4YY3x9xqJy | http://192.168.1.1/super.htm |
Baudtec RN104VR4GCH-2S-A3 | adminpldt | qVuUKLmCJJhCF4YY3x9xqJy | http://192.168.1.1/admin/super.asp |
Baudtec Bizbox RN104R5GCH2-A0 | adminpldt | !@QWaszx#$ERdfcv%^TYghbn | http://192.168.1.1/ |
Prolink PRS1241B | adminpldt | 8d32f84964abbc7a6097e43 | http://192.168.1.1/pldtadmincel.htm |
Prolink PRS1841U | adminpldt | 8d32f84964abbc7a6097e43 | http://192.168.1.1/admin/pldt.asp |
Ultera White Greenpacket WN-600 | allgreen272493 | winpacka | http://192.168.22.1/ |
Arcadyan VR9517PAC22-A-PP | adminpldt | 4dg37skj81rs6ytuc2cxp0a | http://192.168.1.1/arcadmin |
iGateway ADSL GA0.ET263-4 | adminpldt | 5dPf49F1e6L8f4cD0e0UTTW | http://192.168.1.1/TelPlusAdmin |
With these pldt default username and password lists, you can easily login to your device.
FAQs
The default admin password for PLDT router is “1234”.
To access your PLDT router, open a web browser, and type “192.168.1.1” in the address bar.
service reliable you can talk with admin on Skipe jo: j500j500 with a nice support !
thanks nice article
@Tiempo Sabroso Igualmente, pero jaja , lol, lol , ya vi que regresastes de nuevo